Simplify3D User Forum

supercazzola

thank you for this thread, and solution

supercazzola

I just used the default for 0.2 mm and then added 1mm supports

supercazzola

I have no experience with v3, so for me this was always a problem. Thank you for starting this thread @bludin and to @brian442 and @dkightley for providing additional hints. I will try the suggestions, and hopefully see positive results.
I am very grateful !

supercazzola

E884215D-63F6-48F2-AEA4-7947E27F978E.jpeg I have zero issues with supports under large surfaces, but NEVER get good support when the object is small and vertically convex. I went nuts manually inserting supports, so I’m assuming I have a setting that I’m overlooking. 6A96CF70-A80A-4C85-AD91-9D0E225...

supercazzola

I changed the extruder multiplier to 1.05 and had the same symptoms. Always seems to print great close to the heated bed, and then crappy as it travels higher (bed lower). Fans are off. Any other ideas? I tried to increase the extruder multiplier to 1.10 and wound up with a lot of blobs and some bur...

supercazzola

Here is another photo - looks like underextrusion , but why would the lower 4 to 5 layers print okay? I believe all of the speeds are the same, as are the support speed multipliers

supercazzola

Before you post any more photos, any chance you can sort out the photos you've posted that don't show? Rather than trying to link in from a photo site, why not use the forum's attachment feature. Its a breeze to use!! Grey bar at the bottom of the posting window...."Upload attachment"...a...

supercazzola

Extruder tab: [/b] http://forum.simplify3d.com/viewtopic.php?f=8&t=1980 Layer tab: [/b] http://forum.simplify3d.com/viewtopic.php?f=8&t=1941 Additions tab: [/b] http://forum.simplify3d.com/viewtopic.php?f=8&t=2100 Infill tab: [/b] http://forum.simplify3d.com/viewtopic.php?t=1953 Support...

supercazzola

S3D is nice in that everything is based on the default speed. So you just decrease that one value and it will slow everything down. thank you for your reply. yes, I am finding it to be a very amazing tool. The learning curve is a bit rough for newbie like me, but I can appreciate its strength and e...

supercazzola

I'm new to 3D printing and slicing, so please be patient with me. At first, I was just using the PLA profile and adjusting temps for PETG. Of course, the quality of the print was horrible https://ibb.co/cvJuUF Then, I learned a bit about the retraction settings and print speed, and thought I was mak...

Search found 12 matches

Re: post processing script

Re: Which setting will bring the supports closer to the curv

Re: v4 rafts - first object layer not filled

Which setting will bring the supports closer to the curves?

Re: PETG blues (well, yellow)

Re: PETG blues (well, yellow)

Re: PETG blues (well, yellow)

Re: Tip of the Day Compilation: FFF Settings Window

Re: confusion over speed

PETG blues (well, yellow)