Auto-Configure for Materials: Several profiles in here, but temperature changes to the Primary Extruder will not remain unique to their profile.
Example:
What I want:
ABS - L1=245, L2=235, L3=225. Bed 90
PLA - L1=230, L2=220, L3=210. Bed 50
What happens:
ABS - L1=245, L2=235, L3=225. Bed 90
PLA - L1=245, L2=235, L3=225. Bed 50
Any change to ANY temperature on the Extruder ONLY (Bed temps remain different for profiles) will result in that temperature being changed for ALL other profiles.
Big note!
This is not an issue on my single extruder profile for my other printer! The temps remain unique per material !!!
