Hey,
I noticed every new layer begins with the Z lifting a bit.
How do I cancel that?
example:
T1
; tool H1.000 W1.700
; skirt
G1 X93.896 Y57.518 Z4.000 F1200
G1 X93.896 Y57.518 Z1.000 F1200
G1 X93.901 Y57.510 Z1.000 E0.0069 F600
G1 X93.951 Y57.422 Z1.000 E0.0716 F600
thanxs.
Re: Z height - first line in layer
... never seen a gcode like this!
The normal format looks like my example, the Z-value is global, given out in front of all commands for this layer. Next layer >>> next Z-value ... a.s.o.
Please attache your factory-file here, complete with the sliced model.
horst.w
GER
; process Process1
; layer 1, Z = 0.100
T0
G92 E0.0000
G1 E-1.7000 F3000
; feature skirt
; tool H0.200 W0.576
G1 Z0.400 F1002
G1 X125.671 Y34.719 F4800
G1 Z0.100 F1002
G1 E0.0000 F3000
G92 E0.0000
G1 X131.697 Y28.692 E0.4093 F1500
G1 X161.350 Y28.692 E1.8335
G1 X167.377 Y34.719 E2.2428
The normal format looks like my example, the Z-value is global, given out in front of all commands for this layer. Next layer >>> next Z-value ... a.s.o.
Please attache your factory-file here, complete with the sliced model.
horst.w
GER
; process Process1
; layer 1, Z = 0.100
T0
G92 E0.0000
G1 E-1.7000 F3000
; feature skirt
; tool H0.200 W0.576
G1 Z0.400 F1002
G1 X125.671 Y34.719 F4800
G1 Z0.100 F1002
G1 E0.0000 F3000
G92 E0.0000
G1 X131.697 Y28.692 E0.4093 F1500
G1 X161.350 Y28.692 E1.8335
G1 X167.377 Y34.719 E2.2428
