nuggetz
Posts: 15
Joined: Thu Oct 06, 2016 8:34 pm

Weird support issue

Tue Nov 27, 2018 9:22 am

I just generated some supports and the placement before slicing looked ok but check out the result.
Attachments
PreSupport.JPG
SupportIssue1.JPG

dragonn
Posts: 17
Joined: Sat Nov 10, 2018 9:11 am

Re: Weird support issue

Tue Nov 27, 2018 9:25 am

Your model is probably broken, try repairing it with for example netfab.

nuggetz
Posts: 15
Joined: Thu Oct 06, 2016 8:34 pm

Re: Weird support issue

Tue Nov 27, 2018 9:50 am

3D Builder in windows didn't find any issues. Slices ok as is in Slic3r.

dragonn
Posts: 17
Joined: Sat Nov 10, 2018 9:11 am

Re: Weird support issue

Tue Nov 27, 2018 12:48 pm

Can you post the STL file and factory file?

User avatar
dkightley
Posts: 2059
Joined: Tue Mar 10, 2015 4:09 pm

Re: Weird support issue

Tue Nov 27, 2018 2:13 pm

PS the factory file will contain the stl file.....so you don't need both!

And by factory file, I mean the file with the .factory suffix...…..not the profile file, which has .fff as its suffix.
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net

nuggetz
Posts: 15
Joined: Thu Oct 06, 2016 8:34 pm

Re: Weird support issue

Tue Nov 27, 2018 11:49 pm

Here you go
Attachments
support.factory
(972.36 KiB) Downloaded 44 times

User avatar
dkightley
Posts: 2059
Joined: Tue Mar 10, 2015 4:09 pm

Re: Weird support issue

Wed Nov 28, 2018 5:19 am

Try the attached. Shape file repaired using 3D Builder.

When using 3D Builder, you need to "Import" the shape to kick in the checking.
Attachments
Dial_Back_A_v2_conduit-post.3mf
(212.36 KiB) Downloaded 20 times
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net

Return to “Troubleshooting and Bug Reports”