Hello, just recently got a Anycubic Predator delta style printer and I am at a loss as to what is causing this strange artifact on the surface of my prints. Any help would be appreciated.
Speed: 60mm/s
Height: 0.2mm
Walls: 2
Solid top: 3
Solid bottom: 2
Infill: 15% Cubic
Material: PLA
Nozzle: 0.4mm
Wall width: auto
Temps: 210/55
Re: Strange surface finish
Please post a photo.
"Strange Artifact" isn't enough information.
"Strange Artifact" isn't enough information.
