siva
Posts: 24
Joined: Tue Dec 02, 2014 4:37 pm

Printing without bottom/top layer

This bracelet (http://www.thingiverse.com/thing:290804) description says "Output is a solid model intended to be printed with no infill and no top or bottom layers." Any idea how this can be done with Simplify3D or any other software?
2Davidoff
Posts: 10
Joined: Wed Jan 07, 2015 6:49 am

Re: Printing without bottom/top layer

Top Solid Layers = 0
Bottom Solid Layers = 0
Optionally check "Single outline corkscrew printing mode"

All of the above are in the "Layer" tab of your process settings.

Return to “General Discussion and Tips”