Oncology Engineer
Posts: 8
Joined: Tue Jan 08, 2019 12:39 am

Jammed filament at start of print

Tue Apr 02, 2019 10:27 pm

Dear All,

Thanks for reading, hoping someone can help.

I have an issue that originally thought it was happening at the end of a print but might be happening from the start!

If I print something for more than 30 mins it will turn out great.

Next print the extruder blocks. This is regardless if the hotend temp remains at the same temp as previous or if it has cooled down completely.

I've attached a pic or a typical blockage as well as my g code from a recent print

Machine details;
AON M2 watercooled
Dyze Extruder with E3D Volcono nozzle 0.4 mm
Printing with ABS

Phantom 85 Block.gcode
(880.93 KiB) Downloaded 67 times

Return to “Troubleshooting and Bug Reports”